Clean Room

More

Clean Room Research Library

Selecting an Environmental Chamber
Cincinnati Sub-Zero Products, Inc.
Your company has just developed a new product, and now it is your job to select an environmental chamber to test it. The product must be tested at various conditions to ensure its quality and reliability. Where do you start? What will determine your selection crite- ria? Price, quality, capabilities…. As with any major purchase, sev- eral items must be considered before making the final decision. ...
 
Autoclaving Spinner Flasks
Bellco Glass Inc.
Autoclaving the Spinner Flasks, they should be Autoclaved at 121 Degrees Celsius @ 15psi. For at least 45 minutes or depending on your labs protocol. They can be Autoclaved in an Autoclave Bag or as they are making sure that the caps are not put on tight. Tighten them down and then back off about a half turn so that they are loose. This is important so as to protect the vessel and caps from any ...
 
Using Photostability Testing Chambers to Meet the Requirements of Drug Testing in Accordance with ICH Q1B White Paper
Caron Products & Services, Inc.
For companies performing photostability testing in accordance with ICH guideline Q1B, CARON's 6540 series chambers overcome the challenges of lamp selection, light control, and other chamber design issues. By integrating technical requirements with practical solutions, CARON's Phoot stability Chambers enhance the testing process to ensure product quality and regulatory compliance. ICH Q1B ...
 
Electronically Commutated Motor White Paper
Labconco Corp.
The modern Class II Biosafety Cabinet (BSC) was developed in the early 1960’s as a result of the increased availability of High Eciency Particulate Air (HEPA) lter technology. At the time, the motor of choice to drive the cabinet’s blower was the Per- manent Split Capacitor (PSC) type. The PSC motor, which is an alternating current (AC) motor, oered manufacturers an inexpensive power source whose ...
 
When to Replace your Biological Safety Cabinet
NuAire, Inc.
Will the BSC need extensive service? (i.e. HEPA filter replacement, blower/motor replacement, will the electrical wire harnesses need replacement? etc.). Can an older BSC be commissioned after it has been in storage or purchased as a resale? Will original test reports be available or will the BSC be commissioned to current NSF Standards?
 

Clean Room Video

Hastest Featured Product Hastest Solutions Inc
 
Biosafety Cabinets Labconco Corp. Learn how to provide protection for personnel, products and the environment from hazardous materials in this short video.
 
Clean Room Parameter Generation & Control, Inc. Information

PharmaTech Features

Clean Room BioCold Environmental, Inc. Information
Clean Room Hastest Solutions Inc Information
Clean Room EMD Chemicals Inc. Products
Copyright © 2010, JAZD Markets, Inc.
Company descriptions and contact information are quoted from the company's website or other promotional information. JAZ'D is not responsible for the accuracy of this information. Unless specifically noted, JAZ'D is not sponsored by, affiliated with or otherwise connected with any of the listed companies.