Home > Laboratory Management > Laboratory Support > Torque Testing

Torque Testing

HBM For over 60 years, the name HBM stands for reliability, precision and innovation all over the world. The company is the technology and market leader and offers products and services for an extensive range of measurement...

View Products | Website | Contact Company

View All Whitepapers

Caron Products & Services, Inc.	Using Photostability Testing Chambers to Meet the Requirements of Drug Testing ... For companies performing photostability testing in accordance with ICH guideline Q1B, CARON's 6540 series chambers overcome the challenges of lamp selection, light control, and other chamber design issues. By integrating technical requirements with practical solutions, CARON's Phoot stability Chambers enhance the testing process to ensure product quality and regulatory compliance. ICH Q1B ...

Patheon Inc.	Dissolution Testing for Solid Oral Dosage Forms Dissolution is an important test method that is carried out on solid oral dosage forms like capsules, tablets, and oral suspensions. For these dosage forms to be efficacious, the active drug substance must be absorbed into the systemic circulation so that it can be transported to its site of activity. The overall efficiency of this process contributes to the bioavailability of the drug substance ...

EHS Solutions	Performance Verification of a Downflow Booth via Surrogate Testing This article describes the performance testing of a downflow booth in accordance with the ISPE Good Practice Guide: Assessing the Particulate Containment Performance of Pharmaceutical Equipment.

The Baker Company	Pharmacy Isolator Performance Testing The United States Pharmacopeia (USP) has recently released an In-Process Revision to Chapter <797> – Pharmaceutical Compounding – Sterile Preparations.1 The Baker Company conducted a study to evaluate its phar- macy isolators using the criteria presented in the In-Process Revision. The results in this paper demonstrate that the SterilSHIELD (compounding aseptic isolator – CAI) and the ChemoSHIELD ...

ACM Global Central Laboratory	Nephrotoxicity Testing in Clinical Trials to Improve Patient Safety The incidence of drug-induced nephrotoxicity is unknown but is generally considered to be high. Kleinknecht et al. (1987)1 suggested that the incidence of kidney damage due to antibiotics has been reported to be up to 36%, much of which is fortunately reversible. The range of pharmaceutical drugs shown to be nephrotoxic in some individuals is extensive. This is hardly a surprise as 25% of ...

View All Whitepapers

More

Torque Testing Research Library

BioScreen Testing Services, Inc	Pre-Market Testing for Personal Care Products Pre-Market Testing for Cosmetic and Personal Care Products Requirements for Safety Efficacy and Maintaining Product Integrity By Bradford Rope, President BioScreen Testing Services, Inc. What could be more important than protecting your trademark and good name of your company? Anyone can purchase a formula in a bottle, but the knowledge of how to protect your investment can make or break your ...

Lancaster Laboratories	Raw Materials Express Testing At no additional cost to clients, Lancaster Laboratories streamlines Raw Materials testing expressly for certain routine USP and EP tests. Have results in 5 days if compendia methodology and noncustomized documentation formats suit your project needs. And with LabAccess.com, our 24/7 web portal, view all your data such as analysts' notebooks, chromatograms, and individual test results as your ...

Woodley Equipment Company Ltd	Point Of Care Testing in Clinical Trials Point Of Care Testing in Clinical Trials – Page 1 Point of care (POC) testing is diagnostic testing performed promptly and conveniently in the vicinity of the patient, avoiding the often lengthy procedure of sending samples to be processed in a central laboratory. This gives rise to the alternative names of near‐patient and bedside testing. The requirement for POC testing is increasing, with the ...

Lancaster Laboratories	Lancaster Labs offers Melamine testing In August 2009 the Food and Drug Administration released a guidance for industry titled, Pharmaceutical Components at Risk for Melamine Contamination. The document, identifying various raw materials that are considered high risk for melamine contamination, recommends monitoring of these raw materials for the presence of melamine prior to release into production. The FDA also provided links to ...

Prime Technologies	Leveraging Vendor Testing within User Validations Leveraging Vendor Testing within User Validations A Prime Technologies, Inc. Guidance Document November 2005 Prepared by: Frank Gellner Rev 1, Date: 12 Nov 2005 ProCalV5 Prime Technologies, Inc Page 1 of 4 GUIDE-2005-1112-IMP.2 Rev 1 Leveraging Vendor Testing within User Validations 12 Nov 2005

Torque Testing Video

BIOCIUS	3-minute Explainer: BIOCIUS RapidFire System and ... Watch this overview and demonstration of the RapidFire High Throughput Mass Spectrometry System.

MitoSciences Inc	Dipstick Assay Demonstration Video Video demonstration of a dipstick assay.

PharmaTech News

Torque Testing Thermo Scientific Cell Culture and Bioprocessing Products

Torque Testing BioClinica, Inc. Information

Aerosol Test
Biological Testing
Compendial Testing

Dissolution Testing
Explosion Test
Filter Testing

Lean Lab
Microbiological Testing
Mycoplasma Testing

Safety Testing
Sterility Testing
Water Testing

BioPharma
Chemical Ingredients
Clean Room
Contract Manufacturing
Distributors

Drug Delivery
Drug Discovery
Environmental Monitoring
Facilities Management
Financial Management

Human Resources
Information Technology
Laboratory Management
Logistics & Supply Chain Management
Material Management

Pharmaceutical Manufacturing
Regulatory Compliance
Revenue Management
Services

Copyright © 2010, JAZD Markets, Inc.

Company descriptions and contact information are quoted from the company's website or other promotional information. JAZ'D is not responsible for the accuracy of this information. Unless specifically noted, JAZ'D is not sponsored by, affiliated with or otherwise connected with any of the listed companies.